Document's / MISC

Home > TELSCOPE > Document's / MISC

Data Supplier Sensor List

Please see the attached document for integration with Data over networks such as Modbus, UPC-UA, etc.

Automatic Machinery

If you have Automation Sensors connected to TELSCOPE, you can toggle between Manual or Automatic, see picture below. New Installation: After the Telko Support Department has done a configuration of the system, the crew needs to switch all Machinery to (Is Automatic). To do this, go to: - Engine - Machines - Settings - Set "Is automatic" to on

TELSCOPE Installation Checklist

The installation checklist is mandatory and must be handed over to the captain after installation

TELSCOPE Data Collection

TELSCOPE data collection can be broadly divided into two categories: Navigation data, and engine room data Navigation data TELSCOPE requires an IEC 61162-1 (NMEA) serial connection to a GPS providing compliant sentences for position, time and speed/course over ground: - Position: GGA, GLL, GNS, RMC - Course over ground (COG): RMC, VTG, OSD - Speed over ground (SOG): RMC, VTG, OSD TELSCOPE will also make use of additional provided navigation data provided via IEC 61162-1 (N...