Installation

Physical installation The following illustration provides an overview of mounting and wiring of TELSCOPE At Our Support Portal can read more about TELSCOPE Installation, Configuration, Block Diagram, Documents https://telko.liveagent.se/279949-TELSCOPE BEFORE YOU BEGIN ☐ Check that you have all relevant information about IT Settings for the TELSCOPE installation this will normally be provided by the Integrator or Customer IT Department ☐ Check with the responsible Integrator about which ins...

TELSCOPE can be setup without connecting a monitor by connecting a laptop through the "service port" enp2s0 (lower right). The TELSCOPE setup service is reachable at http://10.10.10.10. First the laptop must be configured to be in the 10.10.10.0/24 network. This can be done by following these steps: (These steps are for Windows 10 but are similar for other operating systems). 1. Click the network tray icon. 2. Click "Network & Internet settings". 3. Click "Change adapter options". ...

See attached Block Diagram below. All questions regarding Option Display, Keyboard, Mouse, UPS are referred to the responsible project team for specific installation By default, Telscope is delivered with single server. For certain specific requirements and solutions, Telscope can be delivered as a Dual Server setup

TECDIS link to TELSCOPE TECDIS 4.8.3.6 s4 provides the following link to TELSCOPE To activate the serial output to TelScope: - Edit C:\Program Files (x86)\TECDIS\TELchart.ini. - Locate the setting "serial_PTLK_port" in the [Options] section, and set this to the serial port number connected to TelScope. To add output: - Edit C:\Program Files (x86)\TECDIS\TELchart.ini. - Locate the setting "serial_PTLK_all" in the [Options] section, and set this to 1. To adjust the baud ra...